LLDPE / HDPE / LDPE / PP / PVC / POM / ABS Granules

Our product has high density polyethylene for non-toxic, tasteless, no smelly white particles, melting point is about 130 °C, relative density of 0.941 ~ 0.960. It has good heat resistance and cold resistance, chemical stability, but also has high rigidity and toughness, good mechanical strength. Dielectric properties, environmental stress cracking resistance sex also is good.

Description

HDPE/LDPE granules Specification :

Fiber (Carpet, Textiles, Upholstery, etc.)
Film (Shopping bags, casting film, multilayer film, etc.)
Blow Molding (Medical & Cosmetic container, Lubricant & Paint container, etc)
Extrusion Molding (Sheet, Pipe, Wire & Cable, etc.)
Injection Molding (Automotive, Electronic, Construction, House wares, Furniture, Toys, etc.

Film grade

Performance project		test data	unit
basic properties	density	0.9250	g/cm³
basic properties	MFR	2.8	g/10min
mechanical properties	tensile strength	11.0	Mpa
mechanical properties	elongation at break	550	%
processing properties	adhesive	3.0	n/10cm²
other properties	fisheye	20	piece/1200cm²
other properties	haze	14.0	%

Injection grade

item	test condition	test method	value	unit
mfr	190°c/2.16	ASTM D-1238	20	g/10min
density	—	ASTM D-792	0.954	g/cm3
tensile strength at yeild	—	ASTM D-638	28	mpa
elongation at break	—	ASTM D-638	250	%
impact tensile strength	—	ASTM D-1822	42	kj/m2
escr		ASTM D-1693	3	—
vactt	—	ASTM D-1525	127	°C